ROTALK Forum
Welcome, Guest
Ask the community for their best thinking on your 912/914 series Technical Questions.
Topics [912 / 914 Technical Questions]
-
Manufacturing date for Rotax 912 engine
- by Milan Pavkovic
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by RotaxOwner Admin
- • 1 reply
-
Is it necessary to include drive gear for gear box overhaul
- by Michael Howard
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Rotax-Owner
- • 3 replies
-
Is it necessary to include drive gear for gear box overhaul
- by Michael Howard
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Fred Northup
- • 1 reply
-
Voltage dropping in flight
- by Michael Gallagher
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Michael Gallagher
- • 8 replies
-
Erratic rpms Rotax 912/Garmin G3X
- by Bert Sparrow
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Bert Sparrow
- • 10 replies
-
EGT alarm in Power descent
- by Thomas Hennessy Jones
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Roger Lee
- • 1 reply
-
912 - Time Limits for Parts
- by Georgia Papadimitriou
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Georgia Papadimitriou
- • 9 replies
-
914 Muffler Temp
- by Dave Anderson
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Sam Purpura
- • 4 replies
-
Carb slide not going up not allowing full throttle RPM
- by Paul Hamilton
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Paul Hamilton
- • 7 replies
-
Another low EGT at idle
- by Rob Overly
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Rob Overly
- • 2 replies
