ROTALK Forum
Welcome, Guest
Ask the community for their best thinking on your 912/914 series Technical Questions.
Topics [912 / 914 Technical Questions]
-
Uneven CHT and investigation
- by John Fleming
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by John Fleming
- • 3 replies
-
RPM Dropped at Max Continuous Power
- by Ray
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Ray
- • 3 replies
-
Oil Coolers - New style vs old
- by John Walsh
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by John Walsh
- • 2 replies
-
Leaking carburettor 912
- by Ian McAtamney
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Ian McAtamney
- • 14 replies
-
Fuel overflow from carb vent tube
- by Larry Olson
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Kevin Stewart
- • 2 replies
-
Rotax 912 Carb float fowling chamber
- by Neil Pearse
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Neil Pearse
- • 3 replies
-
Long term storage damage
- by Jim Isaacs
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Roger Lee
- • 14 replies
-
912 ULS randomly dies at idle
- by Larry Olson
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Roger Lee
- • 6 replies
-
Oil pressure gauge
- by Bob Burque
- in 912 / 914 Technical Questions
- 4 years ago.
- Last replied by Rotax Wizard
- • 1 reply
-
bent valves on all cylinders
- by Uli Hofer
- in 912 / 914 Technical Questions
- 5 years ago.
- Last replied by James Sledd
- • 7 replies