This video reviews the MANDATORY Service Bulletin SB-912 i-017/ SB-915 i-017 SB-916 i-007 - Inspection and/or replacement of crankcase and/or gearbox housing for ROTAX® engine type 912 i, 915 i and 916 i (Series)
Video Length: 16:56

This Video reviews the MANDATORY Service Bulletin SB-912 i-016 / SB-915 i-016 / SB-916 i-006 - Inspection and/or replacement of oil spray nozzle for ROTAX® Engine Type 912 i, 915 i and 916 i (Series)
Video Length: 16:52

This video reviews the MANDATORY Service Bulletin SB-912-080 / SB-914-060 / SB-912 i-015 / SB-915 i-015 / SB-916 i-005 - Inspection and/or replacement of expansion tank assy. for ROTAX® 912, 914, 912 i, 915 i and 916 i (Series) Aircraft Engines
Video Length: 10:02

This Video reviews the Service Bulletin SB-916 i-003 / SB-915 i-014  Inspection and maintenance after an overload clutch slipping event on ROTAX® 915 i and 916 i (Series) Aircraft Engines

Video Length: 12:19

This video discusses the two different versions of the Rotax 900 series engines and specifies which propeller should be used with each version.
Video Length: 5:25

This Video reviews the “PAC” Service Instruction Document SI-PAC-028 Optional Cooling Air Baffle for ROTAX® Aircraft Engines.
Video Length: 7:12

This Video reviews the Service Letter SL-2ST-016R1 /SL-912-026R1 /SL-914-024R1 SL-912 i-018R1 /SL-915 i-013R1/SL-916 i-013 Information on maintenance and spare parts planning for ROTAX® Aircraft Engines.
Video Length: 4:37

This Video reviews the Service Instruction SI-912 i-029 / SI-915 i-012 / SI-916 i-007 Introduction of new double ignition coils and new wiring harnesses for ROTAX® Engine Type 912 i (Series), 915 i (Series) and 916 i (Series).
Video Length: 6:46

This comprehensive guide covers the fundamentals of pop-off valves, the necessary tools required for testing and inspection, and a step-by-step walkthrough of the procedure aligning with the guidelines outlined in the Rotax 915iS and 916iS Line and Heavy Maintenance manual.
Video Length: 8:06

This Video reviews the Service Instruction SI-916 i-005R1 / SI-915 i-010R1 / SI-912 i-026R1 / SI-912-033R1 / SI-914-036R1 Maintenance task add-on for engine suspension frame assembly for ROTAX® Engine Type 916 i (Series), 915 i (Series), 912 i (Series), 912 and 914 (Series).
Video Length: 6:38

This "ROTAX Tool Tips" Video reviews the SI-912 i-002,SI-915 i-002 B.U.D.S. Aircraft Installation Instructions for ROTAX Engine Types 912 i and 915 i (Series).
Video Length: 9:43

This "ROTAX Tech Tips" Video reviews the Service Instruction SI-912 i-004, SI-912-018, SI-914-020, SI-915 i-003 Purging of lubrication system.
Video Length: 11:43

This "ROTAX Tech Tips" Video looks at the Service Instruction PAC SI-PAC-016 "Fuel pump assembly for ROTAX® Aircraft Engines" and the Service Instruction SI-912i-025. It examines fuel pump assembly and instructions for individual fuel pump replacement for fuel injected ROTAX Aircraft Engines of the 912 i and 915 i Series.
Video Length: 3:04

This "ROTAX Tech Tips" Video looks at the Service Bulletin SB-915 i A-007/ SB-915 i B-006 which covers a MANDATORY Inspection and or correction of turbocharger heat shield orientation for ROTAX Engine Type 915 i A and 915 i B Series.
Video Length: 2:44

This "ROTAX Tech Tips" Video looks at the MANDATORY Alert Service Bulletin Inspection and/or replacement of fuel pump assy. for ROTAX® Engine Type 912 i and 915 i A (Series). Internal quality checks have shown that in isolated cases, there may be fuel leakage in the front end area of the power connector side. This may lead to a hazardous condition.
Video Length: 5:11

This "ROTAX Tech Tips" Video looks at the MANDATORY Service Bulletin Inspection of turbocharger assy. for ROTAX® Engine Type 915 i A and 915 i B (Series).  915 iS engines within a designated serial number range must have their part number 893106 turbocharger assembly inspected. Also, any engine equipped during maintenance with a part number 893106 turbocharger assembly within a designated turbocharger part serial number range must also be inspected.
Video Length: 4:20

This "ROTAX Tech Tips" Video looks at the MANDATORY Service Bulletin SB-915 i A-004/SB-915 i B-004 Replacement of Oil Pump Housing for ROTAX Engine Type 915 i A and 915 i B (Series). Field observation has shown that in isolated cases strong smoke emission after longer standstill time might occur. This might be caused by seepage of oil from the oil tank into the turbocharger oil sump due to insufficient sealing. The new housing contains an additional oil pump shaft seal to avoid this effect. 
Video Length: 3:46

This "ROTAX Tech Tips" Video looks at the Alert Service Bulletin ASB-915 i A-003 R2/ ASB-915 i B-003 R2/ ASB-914-054 R2/ASB-915 i A-003 iS R2/ ASB-914-054UL R2 - EXCHANGE OF EXHAUST VALVES ON ROTAX® ENGINE TYPES 915 i A, 915 i B AND 914 (SERIES) providing additional information on exchange of sodium filled exhaust valves for ROTAX 914 and 915iS engines.
Video Length: 2:44

This "ROTAX Tech Tips" Video looks at the Service Instruction SI-914-030 covering the introduction of the new sodium filled exhaust valves for ROTAX 914 and 915iS engines.
Video Length: 4:59