fbpx
Jump to Forum..

oil plug (banjo bolt)

in 912 / 914 Technical Questions 11 years ago

  • Re: oil plug (banjo bolt)

    by » 11 years ago

    Joseph,

    Take Mark's advice and watch the videos. If they are not available to you, click the support tab at the top of the page and go to the line maintenance manual. It will tell you exactly what to do. Oil change is no big deal, only caution i can think of is to NEVER rotate the prop backwards and NEVER rotate the prop with the oil tank empty or the filter off.

    Bill.
      
    Report

  • Re: oil plug (banjo bolt)

    by » 11 years ago

    There is more than one for you. Watch all the oil videos on this page.

    http://www.rotax-owner.com/videos-topmenu/expanded-video-instructions

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
bad leak down numbers and oil usage 912 / 914 Technical Questions 11
Pressure-side oil cooler? 912 / 914 Technical Questions 5
oil purge with oil cooler thermostat question 912 / 914 Technical Questions 2
OIL COOLER LEAK 912iS Technical Questions 3
Bring down oil temperature on a 912 Vz 912 / 914 Technical Questions 25

info@rotax-owner.com