Soft start on 912 uls

by in General Tech Discussion 9 years ago

My question is this: I have the Ducati ignition modules installed on my 912 ULS. I also have the Bully Hawke soft start ignition installed on the engine. When the Ducati fails and we know they are suspect after several hundred hours flying, if I order the new Rotax modules with soft start already installed, will I/do I remove the Bully Hawke soft start ignition that is currently installed or just leave it? Or do I simply re-order standard ignition modules from whomever and continue with the Bully Hawke?

Re: Soft start on 912 uls

by Conrad Beale » 9 years ago

Conrad Beale

3 66 22

Terry,
If you need to replace your Rotax modules because they have become defective, remove the Bully Hawk (ConAir)soft start and install the new Rotax modules with soft start. There is a second hand market for the ConAir soft start. The price of the Rotax modules are pretty much the same with or without the soft start integrated in them.

There is a company in Holland that repairs the Rotax modules and it represents quite a saving over the new Rotax units. I have heard good reports on the repaired units if you want to consider this as an option.

Report
Re: Soft start on 912 uls

by Ryan Goss » 9 years ago

Ryan Goss

6 17 0

If you remove the soft start module i will be more then glad to buy it as long as it in a 4 pin. Ive been looking for one, but since Bullyhawk seems to be out of business i cant seem to find one.

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Kitfox 3 with 912 1300 hrs on engine	912 / 914 Technical Questions	5
Rotax 912iS Regulator B w/ Grey Connector	Parts	0
912iS Fine filter fittings	912iS Technical Questions	3
Troubleshooting Ignition issues 912UL	912 / 914 Technical Questions	20
EGT Monitoring on 912ULS--Why only 2 of 4 cylinders?	912 / 914 Technical Questions	11