When was my 912 built

by Douglas Stokes in General Tech Discussion 10 years ago

I have purchased a Kitfox 3 built originally with a 582. It has presently a 912UL. The 912 engine serial number 415-23-19. Im trying to figure out when it was installed. I keep going through the records but draw a blank on when it was built which will give me a closer date of its installation.

Re: When was my 912 built

by Rob Seaton » 10 years ago

Rob Seaton

3 1.32k 251

It was made April 1993.

Thank you said by: Douglas Stokes

Report
Re: When was my 912 built

by itemprop='name' » 10 years ago

0 0 0

Rob, any chance you could tell me when my engine was built? Engine serial # 5647109 912 ULS. Many thx.
Terry

Report
Re: When was my 912 built

by RotaxOwner Admin » 10 years ago

RotaxOwner Admin

59 1.6k 16.6k

5647109 was produced September 12th, 2006

original factory configuration listed as:

912ULS
without fuel lines
UL2 I=2,43 with clutch
without vacuum pump
with green valve covers
without mech. tachom. pick up
without external generator
without air guide baffle
with std. temperatur sensors
with nipple conn. for oil pump
with expansion tank
without air box
without engine truss
starter large

Thank you said by:

Report
Re: When was my 912 built

by itemprop='name' » 10 years ago

0 0 0

Many thx. for your help. Much appreciated.
Terry

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Kitfox 3 with 912 1300 hrs on engine	912 / 914 Technical Questions	5
Rotax 912iS Regulator B w/ Grey Connector	Parts	0
912iS Fine filter fittings	912iS Technical Questions	3
Troubleshooting Ignition issues 912UL	912 / 914 Technical Questions	20
EGT Monitoring on 912ULS--Why only 2 of 4 cylinders?	912 / 914 Technical Questions	11