I would like to know if there is some differencies between the ignition boxes used on a 912 80 hp and the ignition boxes used on a 912 100 hp...? In other words , may I interchange these elect boxes between an 80 hp and a 100 hp, and viceversa ? Thanks for helps . Marco
-
Re: electronic ignition units for 912 80 hp and 100 hp ; differences
by Sean Griffin » 3 years ago
Check Rotax parts catalogue - If part numbers the same, it is reasonably safe to assume that they are interchangeable.
Be aware that Rotax have upgraded the 912ULS (100 hp) ignition system to what they call "Soft Start". This system involves both ignition modules (black boxes) and fly wheel (ignition timing sensors). I do not know if the same was done for the 912UL (80 hp).
-
Re: electronic ignition units for 912 80 hp and 100 hp ; differences
by Kevin Stewart » 3 years ago
There area various different variants with different connectors. I have seen someone on afors.com who sells adapters to allow you to mix and match.
-
Re: electronic ignition units for 912 80 hp and 100 hp ; differences
by Marco Cosso » 3 years ago
Hi Kevin, thanks for reply. Could you give me the link where there are adapters to allow me to mix and match various different variants with different connectors ? I tried to find them on afors.com ,but nothing.....I cannot... Thanks
-
Re: electronic ignition units for 912 80 hp and 100 hp ; differences
by Kevin Stewart » 3 years ago
Here's the advert although the pictures are missing now:
https://afors.com/aircraftView/31063
I've attached a picture that I captured off the website a few years ago as it looked useful. The seller was
Ian Pilton:- +44 (0)7813754802
32324_2_Rotax SMD Harness.jpg (You do not have access to download this file.)
Thank you said by: Marco Cosso
You do not have permissions to reply to this topic.
Related Topics