fbpx
Jump to Forum..

Rotax On Oil Temperature

in 912 / 914 Technical Questions 8 years ago

  • Re: Rotax On Oil Temperature

    by » 7 years ago

    I have seen it many ways. Across the middle or a couple strips vertically.
    I think most including myself just use a strip across the top and wrap just around the side edges to make sure it stays in place. I have seen people in really cold weather apply a couple of strips. With 2" wide aluminum tape start with 2" wide across. Then if that isn't enough just overlap the next by 1" at a time to make the temps what you want them to be. It's quite simple, easy and cheap.

    p.s.
    They make a really heavy thick aluminum tape with no paper to peel off the back. Don't use that one. Use the thinner version that has paper backing to peel off. Nere use Duct tape or Gorilla tape as they will leave a glue residue because of the heat.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Rotax On Oil Temperature

    by » 7 years ago

    seen on the airplane parking

      
    Report

  • Re: Rotax On Oil Temperature

    by » 7 years ago

    seen on the airplane parking

    1_2017-12-31-2.jpg (You do not have access to download this file.)
    Thank you said by: Wayne Fowler
      
    Report

  • Re: Rotax On Oil Temperature

    by » 7 years ago

    Thanks guys,

    I will look into the tape and let you know how I go.

    You can see in this shot how cool the oil gets - this is on final at my local AD where the outside temp was about 24C

    4912-dash-small.jpg (You do not have access to download this file.)
      
    Report

  • Re: Rotax On Oil Temperature

    by » 7 years ago

    Don't worry about temps when setting up for landings. Your throttled back and not a lot you can do about it and it isn't that important for that short time. We just don't want all our cruise flights to be too low.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: John Fleming
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Pressure-side oil cooler? 912 / 914 Technical Questions 5
Rotax 912iS 2 Sport 912iS Technical Questions 2
rotax 912 engine resistance to water ingestion 912 / 914 Technical Questions 4
Rotax 582 blue head Rise in RPM during Mag check General Tech Discussion 0
Rotax 912iS Sport General Tech Discussion 4

info@rotax-owner.com