fbpx
Jump to Forum..

Replacing the 912 ULS ignition moldule

in 912 / 914 Technical Questions 9 years ago
I am replacing the ignition modules on my 912 ULS. They connect to the engine with nylon slide-in connectors. Looks like there are 3 push tabs to lock the connectors together. All 3 tabs need to be depressed at the same time to separate the connectors. See photo. Suggestions?
Tony
P1010425.JPG (You do not have access to download this file.)

  • Re: Replacing the 912 ULS ignition moldule

    by » 9 years ago

    Just use a fingernail or a small flathead screwdriver and just slide it in where the catch is and it releases. There is not 2 or 3 release to just unplug the connector.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Kitfox 3 with 912 1300 hrs on engine 912 / 914 Technical Questions 5
Rotax 912iS Regulator B w/ Grey Connector Parts 0
912iS Fine filter fittings 912iS Technical Questions 3
Troubleshooting Ignition issues 912UL 912 / 914 Technical Questions 20
EGT Monitoring on 912ULS--Why only 2 of 4 cylinders? 912 / 914 Technical Questions 11

info@rotax-owner.com