Flywheel hub 966872
in 912 / 914 Technical Questions
9 years ago
-
by Conrad Beale » 9 years ago
Rob,
The IPC calls up the new flywheel hub on the 80Hp & 100Hp engines, and the intention from Rotax was to introduce it on the 80Hp engine some years ago.
Both the 80Hp & 100Hp engines should have the soft start modules & flywheel. If you could help with the serial numbers where they were introduced on the 80 &100Hp engines it would be appreciated.
Your help here is great...Much better than we can get locally.Flywheelhub.png (You do not have access to download this file.)
-
by Rob Seaton » 9 years ago
challenge accepted!
I am away all next week so so will dig into it the following week.
-
by Rob Seaton » 9 years ago
Conrad:
It was a 2 step process: THe AMS was introduced and then later on the flywheel
1st the ASM was installed beginning with the following:
912 A 4411002
912 F 4413022
912 UL 6771109
2nd the flwheel was introduced:
912 A 4410880
912 F 4412976
912 UL 4409883
-
by Conrad Beale » 9 years ago
Rob,
Thank you.... I wasn't able to get this information from our local distributor. You are a credit to the Rotax community.....
On the ULS/S am I correct assuming it was a single stage process with the introduction of flywheel & soft start SMD modules at the same time. 912ULS s/n 6775360 & 912S s/n 4923847.
-
by Rob Seaton » 9 years ago
Thanks Conrad. yes, that is correct.
You do not have permissions to reply to this topic.
Related Topics