-
Re: Would like to know the year my Rotax 912 ULS was built
by Michael Saunders » 10 years ago
Hi Rob
Could you advise the year of manufacture of 912 ULS2 - 6.779.932?
Also looking at the float bulletin it is not one of the ones that requires the carb floats exchanged, am I correct?
Thanks
Mike
-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 10 years ago
6779932 Production Date 27/03/2012
original factory configuration:
without fuel lines
UL2 I=2,43 with clutch
without vacuum pump
with green valve covers
without mech. tachom. pick up
without external generator
without air guide baffle
with std. temperatur sensors
with nipple conn. for oil pump
with expansion tank
without air box
without engine truss
starter large
Engine 6779932 is not included in the float recall.
But you should verify that neither carbs nor floats have been replaced since the engine was new. (see Criterion B & Criterion C in the bulletin SB-912-067 UL)
Thank you said by: Michael Saunders
-
Re: Would like to know the year my Rotax 912 ULS was built
by Michael Saunders » 10 years ago
Thanks Admin. I had looked these up and were ok. (Have 1/3 120289 & 2/4 120364)
Thanks for the build date and information. Best regards
Mike
-
Re: Would like to know the year my Rotax 912 ULS was built
by Paul Searles » 10 years ago
Hello, Rob.
Please tell me what you can about 912 ULS S/N 5,649.497
Thanks.
Paul
-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 10 years ago
912ULS 5649497 was produced August 27, 2007
Original factory configuration:
without fuel lines
UL2 I=2,43 with clutch
without vacuum pump
with green valve covers
without mech. tachom. pick up
without external generator
without air guide baffle
with std. temperatur sensors
with nipple conn. for oil pump
with expansion tank
without air box
without engine truss
starter large
Thank you said by: Paul Searles
You do not have permissions to reply to this topic.
Related Topics