-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 8 years ago
Nameplate indicates that it is a 912 ULS2, with the new-style heads ( "01-suffix" ) - the nameplate suffix is mentioned in this video: http://www.rotax-owner.com/en/videos-topmenu/rotax-minute/448-newcylheads
6785618 is a 912 ULS (912 ULS2-01) produced 01-Feb-2016.
original factory configuration:
with fuel lines
UL2 I=2,43 with clutch
without vacuum pump
with green valve covers
without mech. tachom. pick up
without external generator
without air guide baffle
with std. temperatur sensors
with screw connection UNF
with expansion tank
without air box
without engine truss
starter large
-
Re: Would like to know the year my Rotax 912 ULS was built
by Paul Hamilton » 8 years ago
That is interesting and great news. thank you. Why would it have the old Vdo oil pressure sensor? Which brought up my question. I thought the were engines had the new digital oil pressure sender?
-
Re: Would like to know the year my Rotax 912 ULS was built
by John Flaherty » 8 years ago
912 ULS 5647073
Thanks.
-
Re: Would like to know the year my Rotax 912 ULS was built
by Rob Seaton » 8 years ago
Paul, your engine was shipped with a Keller oil pressure sensor, the installed must have swapped it out for the VDO.
Thank you said by: Paul Hamilton
-
Re: Would like to know the year my Rotax 912 ULS was built
by Paul Hamilton » 8 years ago
OK thanks Rob. I bet the manfacturer switched it out to match the panel gages. Now I understand the setup and it makes sense. Appreciate your help. I was suspicious seeing the old VDO gage on a new engine
You do not have permissions to reply to this topic.
Related Topics