-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 8 years ago
4409188 is a ROTAX 912 UL (912 UL2) produced 30-Apr-2008.
original factory configuration:
without fuel lines
UL2 I=2,27 without clutch
for fixed pitch propeller
without vacuum pump
without mech. tachom. pick up
without air box
without external generator
without engine truss
without air guide baffle
with std. temperatur sensors
with nipple conn. for oil pump
with expansion tank
starter standard
-
Re: Would like to know the year my Rotax 912 ULS was built
by Wesley Elliott » 8 years ago
Trying to find information on my new to me engine. 912 UL with serial number #4406103.
I believe it is a 2004? I am hoping it has the newer ignition system than those of the 90's? Been trying to reserch it online before wasting other peoples time. Just new to Rotax 912's and in the learning stages. TBO on this engine I believe is 1500 unless I upgrade the crankcase. Which I have read is very expensive.
Thanks for anyones help and insight into this engine.
Wes
-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 8 years ago
4406103 is a ROTAX 912 UL (912 UL2) produced 22-Dec-2003.
original factory configuration:
without fuel lines
UL2 I=2,27 without clutch
for fixed pitch propeller
without vacuum pump
without mech. tachom. pick up
without external generator
without air guide baffle
with std. temperatur sensors
with nipple conn. for oil pump
with expansion tank
That particular engine will need to comply with SB-912-057UL to obtain a TBO extension to 2000 hours. You should check the logbook to see if it has already been complied with (you can also physically check the crankcase to verify what part number it has...) . Since the engine is "new to you", you should also check the engine logbook to verify that all of the MANDATORY service bulletins were complied with over the years. (See your email for a checklist...)
starter standard
-
Re: Would like to know the year my Rotax 912 ULS was built
by John » 8 years ago
Seeking information for serial # 6770586
Any information greatly appreciated.
-
Re: Would like to know the year my Rotax 912 ULS was built
by RotaxOwner Admin » 8 years ago
6770586 is a ROTAX 912 UL (912 UL2) produced 1-Dec-2011.
original factory configuration:
with fuel lines
UL2 I=2,27 without clutch
for fixed pitch propeller
without vacuum pump
without mech. tachom. pick up
without air box
without external generator
without engine truss
without air guide baffle
with std. temperatur sensors
with screw connection UNF
with expansion tank
starter standard
You do not have permissions to reply to this topic.
Related Topics