fbpx
Jump to Forum..

low rpm

in 912 / 914 Technical Questions 14 years ago
recently bought a tecnam p92 with low hrs. powered by 912 uls. on t/o tach reads 5100 climbs out very well.lvel cruise is usually around 4000 rpm. is it caused by to much pitch on prop?

  • Re: low rpm

    by » 14 years ago

    If the engine is running well otherwise, it sounds very much like a pitch problem.

    Bill.
      
    Report

  • Re: low rpm

    by » 14 years ago

    Hi Thomas,

    I'm a little confused. Are you climbing out at 5100 rpm and then in flat and level cruise the max rpm is only 4000? Climb rpm is usually always lower than WOT flat and level.
    If it develops 5100 WOT on climb out and only gets 4000 WOT in level cruise then it isn't pitch or it wouldn't get 5100 on climb out. If this is really the case then a fuel flow issue may be present.
    I think we need a little more info.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Sudden drop in RPM while changing fuel tank 912iS Technical Questions 3
Fuel Flow EGT 912 / 914 Technical Questions 3
RPM 914turbo 912 / 914 Technical Questions 3
912ULS carb overflowing 912 / 914 Technical Questions 20
at which rpm needle jet begin to raise? what are signs of clogged bypass holes? 912 / 914 Technical Questions 2