Jet size for 912 F series

by jay white in 912 / 914 Technical Questions 13 years ago

I am still chasing the fuel venting problem. Tonight I removed the carburators and inspected the float arms. The distance from the mating surface of the carb bowl to the float arm is supposed to be 10.5. Mine was not close.
The number stamped on the jet is 186. I couldn't remember what the old carburators had in them. Is the jet size right for a 80 horse ul.

Re: Jet size for 912 F series

by Roger Lee » 13 years ago

Roger Lee

131 5.38k 5.44k

Hi Jay,

Here is the page right out of the Heavy Maint. manual. The main jet size should be a 155-158 for the UL-F. Double check the numbers on your jets and use a magnifying glass if need be to make sure.

I recommend that everyone download all the Rotax manuals for your engine. Most answers to question can be found there.

CarbJets.pdf (You do not have access to download this file.)

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: jay white

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Kitfox 3 with 912 1300 hrs on engine	912 / 914 Technical Questions	5
Rotax 912iS Regulator B w/ Grey Connector	Parts	0
912iS Fine filter fittings	912iS Technical Questions	3
Troubleshooting Ignition issues 912UL	912 / 914 Technical Questions	20
EGT Monitoring on 912ULS--Why only 2 of 4 cylinders?	912 / 914 Technical Questions	11