Re-Torque Heads

Re: Re-Torque Heads

by Rob Seaton » 7 years ago

Rob Seaton

3 1.32k 251

Not on the 9-series engines
Yes, it is a 2-stroke requirement.

Re: Re-Torque Heads

by RotaxOwner Admin » 7 years ago

RotaxOwner Admin

59 1.6k 16.6k

You will find that in the current 582 Maintenance Manual, see pages 10-2, 11-2.

Re: Re-Torque Heads

by Bob Robertson » 7 years ago

Bob Robertson

0 5 37

Re-Torque of the cylinder heads is required only on the air cooled Rotax engines (i.e. 447 and 503). It is not required on the liquid cooled engines.
When re-torqueing on air-cooled engines, re-torque cylinder head nuts one at a time... Do not loosen al at the same time unless you have an alignment
jig installed when re-torqueing..