fbpx
Jump to Forum..

Rpm

in General Tech Discussion 7 years ago
I got a 912s that didn t run since a year. I started it with new fuel 100 lll and i can not reach more than 4600 rpm,the sparks p’ugs are new and i didn t change anything else. Can t you help me

  • Re: Rpm

    by » 7 years ago

    Do the carbs fully open? Are the airfilters clean? Are the fuel filters clean? Is there anything that can limit fuel supply?
    Do you have any more engine data available, like EGT temps?
      
    Report

  • Re: Rpm

    by » 7 years ago

    Yes carbs are full open and fuel line is ok.the egt eere about 1100, at 2000 rpm but i didn t check the air filter. I will tomorrow morning thank
      
    Report

  • Re: Rpm

    by » 7 years ago

    Please check all 4 EGTs at max rev.
    In case you have a fuel flow sensor installed, check the reading at max rev/WOT, too.
    What’s your airfield altitude in conjunction with MAP reading at full rev/WOT?
      
    Report

  • Re: Rpm

    by » 7 years ago

    Ok i will check it tomorrow morning thank for all
      
    Report

  • Re: Rpm

    by » 7 years ago

    Is this 4600 rpm static on the ground rpm or in level flight? If static it may be normal rpm. Is this a 912ULS or a 912S certified engine?

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Sudden drop in RPM while changing fuel tank 912iS Technical Questions 3
RPM 914turbo 912 / 914 Technical Questions 3
at which rpm needle jet begin to raise? what are signs of clogged bypass holes? 912 / 914 Technical Questions 2
Rotax 582 blue head Rise in RPM during Mag check General Tech Discussion 0
RPM drop 912UL 912 / 914 Technical Questions 4