fbpx
Jump to Forum..

salt air affect on Rotax Engine

in General Tech Discussion 7 years ago
can any one gives brief experience
salt air affect on Rotax Engine?
what measure can we do on Engine?

  • Re: salt air affect on Rotax Engine

    by » 7 years ago

    Rinse it off with water and spray it down with mineral spirits or a similar non sticky product that won't hurt the rubber or electrical system.
    Thank you said by: Capt. Siva,
      
    Report

  • Re: salt air affect on Rotax Engine

    by » 7 years ago

    Boeing T9 is made for the Boeing company just for this. To stave off corrosion. I used it on our dive compressors that sat in saltwater and it worked great.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: Capt. Siva,
      
    Report

  • Re: salt air affect on Rotax Engine

    by » 7 years ago

    ultra light AIR craft aeroplane is under uses..... what type of measured we can Do in saltwater area uses and NEAR sea storage?
      
    Report

  • Re: salt air affect on Rotax Engine

    by » 7 years ago

    Boeing used this product against corrosion. I have also used it on my diving compressors actually in saltwater. It can be used on almost anything.
    It's called Boeshield T9. It sprays on clear and wet at first and in a few minutes drys. It is paraffin based and should block out harmful salt air elements of corrosion. I don't use Corrosion-X because it stays wet. It works well, but doesn't dry.

    https://boeshield.com/why-boeshield/

    https://www.amazon.com/BOESHIELD-Corrosion-Protection-Waterproof-Lubrication/dp/B001447PEK/ref=sr_1_1?ie=UTF8&qid=1524606079&sr=8-1&keywords=boeshield+t9+waterproof+lubrication

    Copy and paste:
    "True aerospace technology. T-9 was developed and licensed by global aerospace leader, The Boeing Company, to fill a need for high-performance, long-term metal protection and lubrication. T-9’s unique formulation of solvent carrier and paraffin wax coating was engineered to penetrate crevices deeply, displace moisture, dissolve minor corrosion, and leave a clean, waxy coating with lasting durability—without using Teflon, silicone, fluorocarbons, MEK, or acetone.

    Tough but safe. T-9 will not harm paint, plastic, rubber, fiberglass or vinyl. It can be used on engines, wiring and belts. T-9 is nonconductive and will not cause short circuits, so it’s also safe to use on electronics. To use T-9 on engines, apply when the engine is still warm but not running. Allow a few hours to dry before restarting to ensure that the propellant has had time to evaporate."

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

    Thank you said by: RotaxOwner Admin, Capt. Siva,
      
    Report

  • Re: salt air affect on Rotax Engine

    by » 7 years ago

    Thanks Rogers,

    Boeshield T9 is recommended by Rotax BRP?
    please confirm....
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Kitfox 3 with 912 1300 hrs on engine 912 / 914 Technical Questions 5
Rotax 912iS Regulator B w/ Grey Connector Parts 0
rotax rick 618 overhaul 2 Stroke Technical Questions 3
engine preservation (storage) 912 / 914 Technical Questions 1
Ram air to Bing carbs 912 / 914 Technical Questions 7

info@rotax-owner.com