checking oil level

Re: checking oil level

by agustin arango » 14 years ago

agustin arango

1 5 0

60!!!! !!!!You have a gym more than an engine!!

It does not sound normal, do you have a normal oil pressure reading?. I am wondering if the pump is working properly.

If the oil is very very cold (extreme winter conditions) the sound is diferent since the oil becomes very thick.

I am sure this is not the case but just in case are you rotating in the correct direction? Counter-clock wise?

Re: checking oil level

by Paul Redhead » 14 years ago

Paul Redhead

0 2 0

Robert - I fly an AirCam with 300 plus hours on the 912's, if they have not been run for several days it can take as many as 60 strokes. My solution is to check the oil level right after shut down b/4 the oil can syphon into the crankcase.

Re: checking oil level

by Kevin Stewart » 14 years ago

Kevin Stewart

5 184 0

Mine can certainly take 60 pulls of the 3 bladed prop (about 20 prop revolutions) before I hear a gurgle. The oil level has often come up above the minimum mark before that point. It has always been like that since I have owned it from about 400hrs onward.

Re: checking oil level

by Mic Thiessen » 14 years ago

Mic Thiessen

0 1 0

I will echo Kevin's comments. It took me at least 60 prop blades to get the burp. It has been that way since new and it has 70 hrs on it now, that is why I now check after the flight and it only takes 3 or 4 blades after a 20 minute sit time.

Re: checking oil level

by itemprop='name' » 14 years ago

0 0 0

I am a new owner with a 2009 912ULS. My oil girgles after the second compression. Am I missing something here?