Ignition Coil Connector

by Donald Broce in 912iS Technical Questions 2 years ago

912IS—One of the cables from my #2 ignition coil to the spark plug is routed poorly. How do I remove the cable from the ignition coil without damaging anything?

9831_1_IMG_1159.jpeg (You do not have access to download this file.)

Re: Ignition Coil Connector

by Roger Lee » 2 years ago

Roger Lee

131 5.38k 5.44k

Unscrew the rubber plug cap and re-rout ir. Then trim about 3/8" off the end of the plug cap wire to get some fresh internal wire, place a dab of dielectric grease on the tip of the wire and screw the plug cap back on until it stops.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Rotax 912iS Regulator B w/ Grey Connector	Parts	0
Assistance to identify connector for coolant temperature sensor	915iS Technical Questions	7
Troubleshooting Ignition issues 912UL	912 / 914 Technical Questions	20
914 TCU Computer What Connectors?	912 / 914 Technical Questions	1
HIC connector assembly	General Tech Discussion	0