FT-60

by Nikolai in 912iS Technical Questions 7 years ago

Good afternoon. today I received fuel consumption sensors ( ft-60). I looked into the holes and saw that they were shrinking to 3 millimeters. this is much smaller than the diameter of the fuel system tubes. is that okay?

Re: FT-60

by geoffrey klestadt » 7 years ago

geoffrey klestadt

27 94 94

https://buy-ei.com/wp-content/uploads/FT-60-Info-Rev-F.pdf

the pressure drop is about 0.5 psi at over 90 l/h. Should be just fine (I hope, I have two of them installed as per Dynon specifications.

Report
Re: FT-60

by Roger Lee » 7 years ago

Roger Lee

131 5.38k 5.44k

many light aircraft use the FT60 fuel transducer. and have been for many years.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: FT-60

by Nikolai » 7 years ago

Nikolai

1 2 0

the diameter of the fuel lines to the pumps is made by a tube with a diameter of 6 mm. from the pumps 8 mm. is this the normal diameter for 912 is and 915 engines ?

Report

You do not have permissions to reply to this topic.