Lane B light and high amp draw
in 912iS Technical Questions
7 years ago
I started my 912is for the first time and it only ran for a couple of seconds before quitting. Tried several times. Started with back up battery power and ran longer, but lane B light came on. Light went to flashing at idle at first, then stayed on after each start. The Dynon SkyView was showing a large amp draw even after running up to high rpm. Did the start and run up a few times with the same results. I didn't get exact rpm because the Dynon wasn't showing rpm or manifold pressure. Any ideas?
The momentary start switch did work on the third attempt.
The momentary start switch did work on the third attempt.
