EMU 912iS Fuel Level Sensor Option

by Tim in 912iS Technical Questions 9 years ago

Has anyone installed the Honeywell LLE102101 fuel level sensor as shown in the Stock Flight Systems EMU installation manual? Just wondering if anyone else was using this solution for their header tank fuel level indicator and what they thought.

Thanks.

Re: EMU 912iS Fuel Level Sensor Option

by Roger Lee » 9 years ago

Roger Lee

131 5.38k 5.44k

Flight Design CTLSi does use a low fuel level indicator on the header tank.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: EMU 912iS Fuel Level Sensor Option

by Rob Seaton » 9 years ago

Rob Seaton

3 1.32k 251

just to clarify: that is a low fuel level warning sensor, not a quantity indicator.
We use it with the Skytek buzzer/warning lamp box and are very happy with it: the light comes on and you have 5 minutes of fuel at full power.

Report
Re: EMU 912iS Fuel Level Sensor Option

by Tim » 9 years ago

Tim

9 19 60

Yep, I understand it is a sensory and not a measure of quantity. I have the Skytek header tank but did not purchase the low fuel warning system they sell. I was originally going to install an M12x1 plug, but as I'm working through the harness to the EMU, and saw the option to wire the sensor directly to the unit, I thought I would see if others had done the same.

Anyway, not sure if you can set parameter alarms in the EMU for this sensor or not. Skytek's system is very nice, but I wanted to know if this was a valid alternative and save some coin.

Thanks again!

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Fuel Pressure Alarm Settings	912iS Technical Questions	0
Sudden drop in RPM while changing fuel tank	912iS Technical Questions	3
Rotax 912iS Regulator B w/ Grey Connector	Parts	0
Assistance to identify connector for coolant temperature sensor	915iS Technical Questions	7
Fuel Flow EGT	912 / 914 Technical Questions	3