fbpx
Jump to Forum..

912iS - Cold Weather Ops

in 912iS Technical Questions 9 years ago
Other than using the proper operating media are there any other precautions when operating the iS in a cold weather environment?

Aviation Real Estate Specialist & iRMT

  • Re: 912iS - Cold Weather Ops

    by » 9 years ago

    Hi Jim,

    A good engine pre-heater in cold climates is a good idea. The tanis system is a top choice. That said I do not know if they have something that works with the 912iS so you would have to call.

    Take some kind of measure to keep oil and coolant temps up while flying. Other than that wear a warm jacket. ;)

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 912iS - Cold Weather Ops

    by » 9 years ago

    Below what outside temp would you recommend pre-heating the iS?

    Aviation Real Estate Specialist & iRMT

      
    Report

  • Re: 912iS - Cold Weather Ops

    by » 9 years ago

    Let's see what Rob and these guys weigh in at for a number. I would say anything below freezing. In some well insulated hangars the engine isn't as cold as the OAT. Some guys help stave off cold air with lightbulbs and a blanket. All sorts of ways. I tend to like the Tanis preheater, but it cost more than a couple light bulbs. :)

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 912iS - Cold Weather Ops

    by » 9 years ago

    Take some kind of measure to keep oil and coolant temps up while flying.


    Could you elaborate on this?

    Aviation Real Estate Specialist & iRMT

      
    Report

  • Re: 912iS - Cold Weather Ops

    by » 9 years ago

    I believe I saw that at 60°F or below that it's recommended to preheat . I pre-heat at 10°C or lower, less warm up time.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Rotax 912iS Regulator B w/ Grey Connector Parts 0
912iS Fine filter fittings 912iS Technical Questions 3
Rotax 912iS 2 Sport 912iS Technical Questions 5
Rotax 912iS 2Sport General Tech Discussion 7
Rotax 912iS 2 Sport 912iS Technical Questions 2

info@rotax-owner.com