fbpx
Jump to Forum..

912is to 912is Sport

in 912iS Technical Questions 11 years ago
Hello,

Is there some body who installed the rétrofit Kit on his 912is to upgrade it ? What price did you really pay ? What are the results ?

Kind regards
Sylvain

  • Re: 912is to 912is Sport

    by » 11 years ago

    Hi Sylvain,

    I don't think they are out yet. Rob may have a better handle on this question.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 912is to 912is Sport

    by » 11 years ago

    I installed a kit and it took about 7 hours of labor at $90/hr. I only went for a short test flight and it started to overspeed so it makes more power. I had to catch a airline flight so did not get to see how it performed after the prop was adjusted.
      
    Report

  • Re: 912is to 912is Sport

    by » 11 years ago

    I have the 912iS installed on my Rans S-7S.I have a Rotax repair center in Michigan. Leading Edge Airfoils is my supplier. I was told late Summer before I will receive my kit to upgrade to the Sport. I was given a level 3 rating to be able to purchase the Buds Level 3 cables to be able to upgrade the Firmware on the 912iS. this will improve the performance until I receive my Kit. If interested in installing the 912iS follow my install on Rans Clan S-7 Forum,Fuel Injected Bush S-7.
    http://www.ransclan.com/forums/showthread.php?2679-Fuel-Injected-Bush-S-7S
    Rick Hayes
    Hayes Aero LLC
    www.hayesaero.com
    Thank you said by: Keith Moon
      
    Report

  • Re: 912is to 912is Sport

    by » 11 years ago

    Hi Rob,

    I heard late summer for the general public. Is that still the schedule?
    I'm surprised it took you 7 hrs. Originally on the first announcement Rotax was saying 4, but I know each plane will be different.

    So my take on this is I should plan all day for in retro fit?

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 912is to 912is Sport

    by » 11 years ago

    I'm old and slow, but its not a race...
    You do have to take the gearbox apart and replace the overload clutch with a new clutch with a higher setting (due to the extra torque)and I think its a good idea to be very methodical and carefully route/tie everything. The instructions are pretty good with lots of pictures, a little too detailed maybe (52 pages!)
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Rotax 912iS Regulator B w/ Grey Connector Parts 0
912iS Fine filter fittings 912iS Technical Questions 3
Rotax 912iS 2 Sport 912iS Technical Questions 5
Rotax 912iS 2Sport General Tech Discussion 7
Rotax 912iS 2 Sport 912iS Technical Questions 2

info@rotax-owner.com