ROTALK Forum
Welcome, Guest
Ask the community for their best thinking on your 912/914 series Technical Questions.
Topics [912 / 914 Technical Questions]
-
CHT temps
- by Neil Cooper
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Garrett Wysocki
- • 1 reply
-
17mm coolant hose and 90 degree hose 922192
- by Andrew Rowley
- in 912 / 914 Technical Questions
- 12 years ago.
- Last replied by Jeffrey Fritts
- • 9 replies
-
manufacture date
- by key dismukes
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by RotaxOwner Admin
- • 4 replies
-
Oil vent line opening location
- by JIM TERRY
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Garrett Wysocki
- • 1 reply
-
912uls Climb RPM
- by Danny Willis
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Fred Northup
- • 3 replies
-
Engine oil purge
- by JIM TERRY
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Ken Ryan
- • 2 replies
-
oil pressure when engine off
- by Ken Ryan
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Garrett Wysocki
- • 14 replies
-
Cylinder Heat exhaust bores
- by Tim Ward
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Tim Ward
- • 10 replies
-
Prop fired during sump/tank gurgle
- by Dennis Urban
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Jim Isaacs
- • 2 replies
-
Manufacture date
- by Jerry
- in 912 / 914 Technical Questions
- 6 years ago.
- Last replied by Peter Kl.
- • 6 replies
