Oil in exhaust pipe

by Lyle Ungerecht in 912 / 914 Technical Questions 2 years ago

What can be cause of oil in my exhaust pipe blowing specks onto the horizontal stabilizer. Have taken turbo off and very little play in turbo shaft. Oil is also in intake manifold system.

Re: Oil in exhaust pipe

by Hans Siedsma » 2 years ago

Hans Siedsma

1 2 3

Carbon has formed in the return oil line from the turbo to the turbo oil pump. ( large diameter pipe) Disassemble the oil sump and return pipe and remove carbon. The carbon seal was located at the connection of the pipe to oil pump. Just did it for the second time ( interval 4 years and 140 hours ) After the cleaning the turbo works fine again and no leakage anymore. See the Rotax instructional video

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Oil tank flare nut torque value	General Tech Discussion	2
Oil tank flare nut torque value	General Tech Discussion	1
What thread is that on my new oil cooler?	912 / 914 Technical Questions	1
ROTAX Service Instruction: Introduction of Sodium-Filled Exhaust Valves and New Cylinder Heads for ROTAX® Aircraft Engine Types 912 and 912 i (Series)	General Tech Discussion	9
Oil Analysis specific for rotax suggestions	General Tech Discussion	7