Hi,
My mechanic is doing the Circlip SB and noticed that the clip is 3 notches down on the left, but only 2 notches down on the right. Is that normal? I'm pretty sure this is how it came from the factory.
Thanks!
-
Re: 914 Circlip Position Different Left and Right?
by Kevin Stewart » 4 years ago
The Rotax maintenence manual says that the needle position should be:
carb supplying cyl# 1/3 should be pos 1 or 2
carb supplying cyl# 2/4 should be pos 2
with position 1 being the top position on the needle. Download the manual and take a look and see if it matches what you have. There is a really good diagram.
-
Re: 914 Circlip Position Different Left and Right?
by Craig E Maiman » 4 years ago
I have the 914 maintenance manual, but I cannot find what you're referring to. I searched on everything I can think of, but nothing.
Can you tell me what section it's in?
-
Re: 914 Circlip Position Different Left and Right?
by Kevin Stewart » 4 years ago
It is figure 73-15/1 in the heavy maintenance manual. I've attached the diagram.
29458_2_Carb Needle Pos.png (You do not have access to download this file.)
Thank you said by: Craig E Maiman
You do not have permissions to reply to this topic.
Related Topics