4152496 was produced 03-Nov-1993.
That is old enough that there is no information in the factory database.
(So there is no way to look up your original factory carb serial numbers.)
those numbers you found are neither (ROTAX) part numbers nor serial numbers.
not all the carbs came with serial numbers, but if yours has them you would find them as shown:

However, if your engine logbook has no indication that the floats have ever been replaced, while you have them out, you might want to weigh them to verify that they are in spec. See this video at the 12:47 mark, for the weight check procedure... https://www.rotax-owner.com/en/videos-topmenu/expanded-video-instructions/445-sb912065