fbpx
Jump to Forum..

Vibration after pitch change

in 912 / 914 Technical Questions 8 years ago

  • Re: Vibration after pitch change

    by » 8 years ago

    Hi Matt,

    .75 or 3/4 of a degree is a lot. Let us know how it turns out.

    I have a Remos coming in this morning with a vibration issue. First things I'll check is prop blades and carb sync.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Vibration after pitch change

    by » 8 years ago

    Hi Roger,

    Got back yesterday and re checked pitch using digital level on phone. This confirmed one blade was out so i set the blade with the phone level and then confirmed using a method i found on the net.

    http://pointsforpilots.blogspot.com.au/2013/02/setting-blade-pitch-for-sensenich.html.

    I did this and now all is well. Thanks for the help and advice.
      
    Report

  • Re: Vibration after pitch change

    by » 8 years ago

    Hi Matt,

    Glad it worked out.

    I read that article. That's doing it the hard way, but hey if it works no problem.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Vibration after pitch change

    by » 8 years ago

    That's actually a great way (the article) to sync the two blades, I personally have a little issue with getting the digital protector method to be supper accurate
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Air Ingress at Oil Change 912 / 914 Technical Questions 1
Gearbox Cause of Vibration? 912 / 914 Technical Questions 13
914 Fuel Pressure/Prop Pitch 912 / 914 Technical Questions 2
912 ULS intermittent Vibration - no power loss 912 / 914 Technical Questions 5
Drain Gear Box during oil change? 912iS Technical Questions 3

info@rotax-owner.com