Loctite 5910 Cleaner?

by Daniel Ward in 912 / 914 Technical Questions 8 years ago

The video on removal/re-install of gearbox says to use DuPont KlensAll to remove all Loctite 5910 to clean surface for new 5910 material. I can only find KlensAll stone and grout cleaner. Where can I find the correct KlensAll to use for cleaning the mating surfaces of the gearbox? Is there another product that will clean the surfaces correctly?
Thanks,
Dan

Re: Loctite 5910 Cleaner?

by Roger Lee » 8 years ago

Roger Lee

131 5.38k 5.44k

Myself and others just use lacquer thinner and a scotchbrite pad to clean up both surfaces. remember not to put too much Loctite 5910 (European) or Loctite 598 (US) on the clean surfaces. Just a good film all the way around. You don't want it to squish out inside the gearbox in big clumps.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Loctite 5910 Cleaner?

by Daniel Ward » 8 years ago

Daniel Ward

2 1 0

Thank you. That answers my question and makes it easier. Also, you answered which Loctite to use for re-install. Again thanks.

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Loctite/Anti-Seize on 912ULS Oil Fitting?	912 / 914 Technical Questions	6
Loctite 577 Supplier	912 / 914 Technical Questions	1
Loctite vs Permatex	912 / 914 Technical Questions	1
598 v.s. 5910	General Tech Discussion	1
Loctite on heads	General Tech Discussion	4