fbpx
Jump to Forum..

coolant hoses

in 912 / 914 Technical Questions 11 years ago
I want to do the 5 year rubber replacement and want to know where to buy the coolant and oil hoses for my 912 in Ontario Canada. The sizes seem to be unusual.

  • Re: coolant hoses

    by » 11 years ago

    The hoses on top of the engine and the two along the bottom of both sides are 17MM ID. There is no substitute for this hose size. I have seen a few try, but it is just sloppy work. The one large hose that comes off the coolant tank is 25mm or 1" ID.
    The oil hoses are 13mm or 1/2" ID.

    You can buy these hoses from your Canadian distributor or one of the US distributors. The distributor's may not all have the identical hose, but will have their equivalent. The 17MM will most likely be the same. The other two may be different.


    http://www.rotec.com/

    http://www.rotec.com/rotax-canadian-repair-centers

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Assistance to identify connector for coolant temperature sensor 915iS Technical Questions 7
Follow up after coolant temperature exceeded 912iS Technical Questions 6
Vent hose for 912ULS coolant overflow bottle? 912 / 914 Technical Questions 7
Minor coolant leak on 912ULS 912 / 914 Technical Questions 8
Rubber hose life? Silicone hoses? 912 / 914 Technical Questions 15