Carburetor Part # Location

Re: Carburetor Part # Location

by Kevin Stewart » 11 years ago

Kevin Stewart

5 184 0

Hi Jim,

You will need to look on the side of the carb opposite the choke. The serial number is in the position equivalent to where the choke would be fitted if it were on that side. The part number is on the web just above where the throttle linkage would be fitted if it too were on that side.

Take a look at this photo.




Kevin

carb_num_location.png (You do not have access to download this file.)

Re: Carburetor Part # Location

by James Ott » 11 years ago

James Ott

22 342 411

Thanks Kevin.
Looks like I will need to remove the carb to be able to see these numbers.

Re: Carburetor Part # Location

by Kevin Stewart » 11 years ago

Kevin Stewart

5 184 0

If you remove the mounting spring and slacken off the clamp around the carb mounting rubber you can carefully rotate the carb until you can see the writing on the back. That will save disturbing too much.

You can also use this technique to improve access to the float chamber if you need to remove the floats.

When you're finished just realign the carb, tighten the clamp and hook the spring back into place.

Kevin

Re: Carburetor Part # Location

by agnar bondhus » 11 years ago

agnar bondhus

0 1 0

Hi
Any news when these new floats are ready to be delivered, and will they be supplied free of charge?