Fuel flow sender

by Przemysław Wiśniewski in 912 / 914 Technical Questions 12 years ago

Hi, I have MGL FF-1 installed for my 912. I have to replace broken fuel flow sender but orginal is very expensive. There is any tested by users alternatives for it? FF-1 computer allow to calibrate with diffrent peak-per-liter count.

Re: Fuel flow sender

by Roger Lee » 12 years ago

Roger Lee

131 5.38k 5.44k

I believe this might work.

http://www.fdatasystems.com/Manuals/FT_60_General.pdf

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Fuel flow sender

by jan kerstens » 12 years ago

jan kerstens

34 131 5

Yes the red cube! Not bad at all.

Another alternative that I have installed with great success is the MGL vortex type FF sender. Easy to install: after the fuel pump. Just cutting (with very sharp scissors) the fuel line to the mechanical fuel pump in two. K factor as recommended 10,000.

Good luck!

Jan

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Fuel Pressure Alarm Settings	912iS Technical Questions	0
Sudden drop in RPM while changing fuel tank	912iS Technical Questions	3
Fuel Flow EGT	912 / 914 Technical Questions	3
How does the TCU reads the fuel pressure?	912 / 914 Technical Questions	2
912ULS carb overflowing	912 / 914 Technical Questions	20