fbpx
Jump to Forum..

914 exhaust pipe problem

in 912 / 914 Technical Questions 12 years ago
I have a 914 in a highlander. the exhaust elbow from the muffler thru the cowl has been rewelded twice in less than 100 hrs and it came off in flight and caused a good bit of damage, and damn near an in flight fire. has anyone experienced the same problem and what is the best fix?

  • Re: 914 exhaust pipe problem

    by » 12 years ago

    Hi Russel,

    I think I would replace it. Is it always breaking in the same place? It is possible you have had poor welds and possibly more than once.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: 914 exhaust pipe problem

    by » 12 years ago

    Roger, as it turns out, it should not be welded at all. It should be installed with a clamp with a pin in it and a hole in the exhaust pipe and the muffler to accept the pin. that is the way it is done on certificated aircraft. live and learn, I guess. thanks for reply and interest. RLM
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
RPM 914turbo 912 / 914 Technical Questions 3
914 TCU Computer What Connectors? 912 / 914 Technical Questions 1
ROTAX Service Instruction: Introduction of Sodium-Filled Exhaust Valves and New Cylinder Heads for ROTAX® Aircraft Engine Types 912 and 912 i (Series) General Tech Discussion 9
914 Fluctuating pressures 912 / 914 Technical Questions 5
914 doesn't go above 4500RPMs! Help needed! 912 / 914 Technical Questions 10