fbpx
Jump to Forum..

Selecting a brand of oil

in 912 / 914 Technical Questions 12 years ago
I have not seen any discussion on using Can-Am (Bombardier) oils in the 912uls. Specifically - XPS synthetic Blend P/N 293600121. This oil is recommended for the Rotax engines in the Can-Am Spyder.I am wondering if anybody is using this oil? Any comments would be appreciated.

  • Re: Selecting a brand of oil

    by » 12 years ago

    Richard,

    I use Harley davidson (Amsoil) API service SG, SL/CF/CG-4 which i get at my local Harley dealer. I would imagine that the Can-Am oil is just as good since the crankcase and gearbox are an integrated unit and share the same oil supply. Main thing to look for is whether the oil is SG rated.

    Bill.
      
    Report

  • Re: Selecting a brand of oil

    by » 12 years ago

    That should work so long as you make sure it's at least a 10-40w. It just needs to be an oil designed for motorcycles because of the different additives.Auto oils don't have these additives. It should be a semi or full synthetic, but that choice also depends on you choice of fuel. (i.e. 100LL or auto fuel) Seems like this oil may be slightly harder to come by than a few other good choices and maybe a tad more expensive.
    Here is a short blog from our forum on oils.

    http://www.rotax-owner.com/rotax-blog/item/8-oils-a-fluid-discussion

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Selecting a brand of oil

    by » 12 years ago

    Thanks to both for the replies. I have a Can-Am dealership, so the oil is readly available :)
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Oil tank flare nut torque value General Tech Discussion 2
Oil tank flare nut torque value General Tech Discussion 1
What thread is that on my new oil cooler? 912 / 914 Technical Questions 1
Oil Analysis specific for rotax suggestions General Tech Discussion 7
Would larger oil hose size increase cooling? General Tech Discussion 4

info@rotax-owner.com