Rubber engine mounts

by Ryan Goss in 912 / 914 Technical Questions 12 years ago

I'm in the process of changing the engine mounts on my Rans S-6. I'm having trouble finding the mounts. CPS and Lockwood do not have them. These are about 2-2.5 inches round. Each donut is about .5 - .75 thick. Any idea where I might find them.

Re: Rubber engine mounts

by bill martin » 12 years ago

bill martin

10 757 0

Ryan,

The mounts you describe sound like either a Lord or a Barry mount. They are about the dimensions you describe. they are two round discs. One has a steel sleeve built into it and the other rubber disc fits down over the sleeve. It has a single bolt which goes through the engine mount and frame with no additional flanges or bolts.

My 912 uses the medium hardness Lord mount which I get from Aircraft Spruce. They have pictures of all the different mounts so you should have no trouble matching them with yours.

Bill.

Report
Re: Rubber engine mounts

by Ron Greene » 12 years ago

Ron Greene

5 30 0

Ryan,

The S-6 mounts are available at RANS. Should be part # 912Donut-3, you will need 8 of them.

RANS website parts pdf is located here. http://rans.com/aircraft/PDFs/aircraft_parts_pdf_2011.pdf

Call RAQNS at (785) 625-6346 and ask for aircraft parts.

Ron

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Kitfox 3 with 912 1300 hrs on engine	912 / 914 Technical Questions	5
engine preservation (storage)	912 / 914 Technical Questions	1
Engine issue on takeoff.	912 / 914 Technical Questions	16
ROTAX Service Instruction: Introduction of Sodium-Filled Exhaust Valves and New Cylinder Heads for ROTAX® Aircraft Engine Types 912 and 912 i (Series)	General Tech Discussion	9
rotax 912 engine resistance to water ingestion	912 / 914 Technical Questions	4