fbpx
Jump to Forum..

RPM 914turbo

in 912 / 914 Technical Questions 9 months ago

  • Re: RPM 914turbo

    by » 8 months ago

    Hello 

     

    We have the prop set correct.

    Our problem is that when the throttle is moved forward it will go to 4750/4850 rpms ( 75%) but it will go into turbo after 4850 rpm.

    It is not going to 4900/4950 and then 5000 and on to turbo

     

     

    Seamus

      
    Report

  • Re: RPM 914turbo

    by » 8 months ago

    Prop is set correct.

    Problem is throttle will go to 4750/4850rpm and past that it goes into turbo.

    it is missing from 4850 to 4950/5000 rpms it keeps wanting to go into turbo

    Seamus

      
    Report

  • Re: RPM 914turbo

    by » 8 months ago

    Seamus,

    When you calibrated the TCU throttle position, did you set 100% at the first throttle stop?  I believe when you go to actual full throttle (past the first stop) that should be set at 115%.  

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
at which rpm needle jet begin to raise? what are signs of clogged bypass holes? 912 / 914 Technical Questions 2
Rotax 582 blue head Rise in RPM during Mag check General Tech Discussion 0
RPM drop 912UL 912 / 914 Technical Questions 4
914 doesn't go above 4500RPMs! Help needed! 912 / 914 Technical Questions 10
RPM's - Rotax Tach vx GRT EIS Tach 912 / 914 Technical Questions 12