582 Ignition Simple Question?

by John Jedlowski in 2 Stroke Technical Questions 14 years ago

I lost one ignition the other day. Swapped the green and white plugs, the opposite ignition did not work. I measured 270 ohms the resistance on the green and white wire to the motor on the one that is working. The one not working appears to be open or no resistance.

Probably easy question for the experts! The problem is the stator? I appreciate your help.
Thank you,
John

Re: 582 Ignition Simple Question?

by bill martin » 14 years ago

bill martin

10 757 0

John,

Sounds like either a bad stator winding or a broken wire if the circuit is open. If you have a crankshaft locking
pin, you can pull the cover, flywheel, and rotor off and check the resistance right at the coil. depending on how much room you have to work in, you may be able to check the coil without removing the stator and pickups. In any case, you can remove it all with no specialized tools other than the crank locking pin. You might get lucky and its just a wire.

Bill.

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Troubleshooting Ignition issues 912UL	912 / 914 Technical Questions	20
Rotax 582 not smooth at all power settings	2 Stroke Technical Questions	3
Rotax 582 blue head Rise in RPM during Mag check	General Tech Discussion	0
EngiBOX Installation on 582 UL	2 Stroke Technical Questions	4
Rotax 582 engine number	2 Stroke Technical Questions	0