No spark firing on rotax 582

Re: No spark firing on rotax 582

by Saad Alanazi » 13 years ago

Saad Alanazi

2 6 0

Thank you all for advice.

But the quastion is if I have problems in some of these things how I do check by using multimeter
1- How I can test the black box?
2- How I can test the spark plug lead?
3- How I can test the ignitions?
4- How I can test the stator?

Saad

Re: No spark firing on rotax 582

by bill martin » 13 years ago

bill martin

10 757 0

Saad,

Go to the "California Power Systems 1 800 Airwolf" website. Click on the Tech Info tab at top of page, then click on Tech articles. Go to article #58 "troubleshooting the ducati ignition system".

It will give you all the information needed check all the components with your multimeter.

There is also a lot of good info in the other articles for just about anything you need to know for the two cycle Rotax.

Bill.

Re: No spark firing on rotax 582

by Saad Alanazi » 13 years ago

Saad Alanazi

2 6 0

Spot on Bill.
This is what I am looking for thank you so much.
Saad.

Re: No spark firing on rotax 582

by Nick Axworthy » 13 years ago

Nick Axworthy

16 325 0

Do let us know how you go on Saad.

Nick.

Re: No spark firing on rotax 582

by Saad Alanazi » 13 years ago

Saad Alanazi

2 6 0

Hi all,
This is my result.
The output from black box was 87.5 ohm green-white.
The output from stator was 210 ohm. green-white.

I did some measurement from different aircraft has a same engine to make sure about the output I found:

The output from black box was 87.6ohm green-white.
The output from stator was 310 ohm. green-white.

So I think the stator need to be replaced. Am I on the right track or not?
Your advice.

Saad.