Changing a 582 blue head to oil injection

Re: Changing a 582 blue head to oil injection

by bill martin » 13 years ago

bill martin

10 757 0

Yes. You can get the injector system from any Rotax dealer. Your blue head and carbs are set up to accept the system. It only involves removing the carbs and rotary valve cover. There is a removable plate on the valve cover where the injector mounts. A nylon gear is mounted inside the rotary valve cover and is driven by the rotary valve shaft. The nylon gear drives the injector. Two plastic oil lines feed oil to the carb manifold which has barbs already installed to accept the oil lines. An oil tank installed a little higher than the engine gravity feeds the pump. An oil cable which controls the oil feed is hooked to the throttle cable with a junction block. One days work and you are in business.

Bill.

Re: Changing a 582 blue head to oil injection

by James OKane » 13 years ago

James OKane

17 39 0

Thanks Bill
K. O

Re: Changing a 582 blue head to oil injection

by Roger Lee » 13 years ago

Roger Lee

131 5.38k 5.44k

Hi James,

This was just taught in Rotax school in California today. This isn't something you want to do if you haven't been taught. There is more involved than just bolting it on. Seek out a Repair center or a 2 stroke Repairman.

---

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Re: Changing a 582 blue head to oil injection

by James OKane » 13 years ago

James OKane

17 39 0

Thanks for the information. I was thinking that there is always more information needed. I would like to take the class. I live in the midwest.

K. O